1CRETP-Single Reduced Electrolytic Tin Plate

Options

Tin Coating
    a. Regular or differential.
    b. Marking system. If differential-lines or geometric.
    c. Melted (Bright).

Base Metal Finish:
    a. 7C (Stone)
    b. 7B
    c. 5C (Shot Blast).
    d. Other-Inquire

Surface Treatment:
    a. CDC (Cathodic Dichromate-normally furnished when treatment not specified).
    b. SDCD (Sodium Dichromate Dip).

Oiling:
    a. ATBC (Acetyl Tributyl Citrate).

Limitations

Tin Coating Weights

Standard Coating Weights are: No. 05, No. 10, No. 15, No. 20, No. 25, No. 50, No. 75, No. 100, No. 05/20, No. 05/25,No. 10/20, No. 20/25, No. 20/30, No. 20/50. No. 20/60, No. 20/75, No. 20/100, No. 25/50, No. 25/75, No. 25/100, No. 25/135, No. 50/75, No. 50/100

Note: Other than above-Subject to Inquiry.

Minimum Ordered Widths
Coils and Cut Sizes

Base Weight	Nominal Thickness-Inches	Minimum Ordered Width-Inches
70 To 135 Incl.	.0077 To .0149 Incl.	26

Maximum Ordered Widths
Coils and Cut Sizes

Base Weight	Nominal Thickness- Inches	Maximum Ordered Width-Inches
		Type D		Type L&MR
		Temper		Temper
		T1-BA	T2-BA	T1-BA	T2-BA	T3-BA	T4-CA	T5-CA
70 to 74 Incl.	.0077 to .0081 Incl.	-	-	-	-	34	-	34
75 to 79 Incl.	.0083 to .0087 Incl.	-	34	-	34	35	35	36
80 to 89 Incl.	.0088 to .0098 Incl.	34	34	34	34	36	36	36
90 to 944 Incl.	.0099 to .0103 Incl.	34	35	34	35	36	37	37
95 to 135 Incl.	.0105 to .0149 Incl.	35	35	35	35	36	37	37

Lengths
Cut Sizes

Base Weight	Nominal Thickness- Inches	Minimum Length- Inches	Maximum Length- Inches
70 To 135 Incl.	.0077 to .0149 Incl......	18	43

Note: Widths and lengths other than above-Inquire.

1CRECCS-Single Reduced Electrolytic Chromium Coated Steel

Options

Base Metal Finish:
    a. 7C (Stone)
    b. 5C (Shot Blast).
    c. Other-Inquire

Oiling:
    a. ATBC (Acetyl Tributyl Citrate).
    b. BSO (Butyl Stearate).

Limitations

Minimum Ordered Widths
Coils and Cut Sizes

Base Weight	Nominal Thickness-Inches	Minimum Ordered Width-Inches
70 To 135 Incl.	.0077 To .0149 Incl.	26

Maximum Ordered Widths
Coils and Cut Sizes

Base Weight	Nominal Thickness- Inches	Maximum Ordered Width-Inches
		Type D		Type L&MR
		Temper		Temper
		T1-BA	T2-BA	T1-BA	T2-BA	T3-BA	T4-CA	T5-CA
70 to 74 Incl.	.0077 to .0081 Incl.	-	-	-	-	34	-	34
75 to 79 Incl.	.0083 to .0087 Incl.	-	34	-	34	35	36	36
80 to 128 Incl.	.0088 to .0141 Incl.	35	35	35	35	36	37	37

Lengths
Cut Sizes

Base Weight	Nominal Thickness- Inches	Minimum Length- Inches	Maximum Length- Inches
70 To 128 Incl.	.0077 to .0141 Incl......	18	43

Note: Widths and lengths other than above-Inquire

1CRBP-Single Reduced Black Plate

Options

Base Metal Finish:
    a. 5A (Velvet)
    b. 7C(Stone).
    c. 7B.

Surface Treatment and Oiling: