|
Options
Tin Coating
a. Regular or differential.
b. Marking system. If differential-lines or geometric.
c. Melted (Bright) or Unmelted (Matte)
Base Metal Finish:
a. 7C (Stone)
b. Other-Inquire
Surface Treatment:
a.CDC (Cathodic Dichromate-normally furnished when treatment not specified).
b.SDCD (Sodium Dichromate Dip)
Oiling:
a. ATBC (Acetyl Tributyl Citrate).
Limitations
Tin Coating Weights
Standard Coating Weights are: No. 05, No. 10, No. 15, No. 20, No. 25, No. 50, No. 75, No. 100, No. 05/20, No. 05/25,No. 10/20, No. 20/25, No. 20/30, No. 20/50. No. 20/60, No. 20/75, No. 20/100, No. 25/50, No. 25/75, No. 25/100, No. 25/135, No. 50/75, No. 50/100
Other Than Above-Subject to Inquiry
Widths
Coils and Cut Sizes
Base Weight |
Nominal Thickness-Inches |
Minimum Width-Inches |
Maximum Width-Inches |
| 55 To 60 Incl. |
.0061 To .0066 Incl. |
28 |
35 |
61 To 100 Incl. |
.0061 To .0066 Incl. |
26 |
36 |
Lengths
Cut Sizes
Base Weight |
Nominal Thickness-Inches |
Minimum Length-Inches |
Maximum Length-Inches |
| 55 To 100 Incl. |
.0061 To .0110 Incl. |
18 |
43 |
Note: Widths and Lengths other than above- Inquire
Options
Base Metal Finish:
a. 7C (Stone)
b. Other-Inquire
Oiling:
a. ATBC (Acetyl Tributyl Citrate).
b. BSO (Butyl Stearate).
Limitations
Widths
Coils and Cut Sizes
Base Weight |
Nominal Thickness-Inches |
Minimum Width-Inches |
Maximum Width-Inches |
| 55 To 60 Incl. |
.0061 To .0066 Incl. |
28 |
35 |
| 61 To 100 Incl. |
.0067 To .0110 Incl |
26 |
36 |
Length
Cut Sizes
| Base Weight |
Nominal Thickness- Inches |
Minimum Length- Inches |
Maximum Length- Inches |
| 55 To 100 Incl. |
.0061 to .0110 Incl...... |
18 |
43 |
Note: Widths and Lengths other than above- Inquire
Options
Base Metal Finish:
a. 7C(Stone).
b. Other-Inquire
| Surface Treatment and Oiling: |
|
- As Rolled - Uncontrolled residual rolling oil level not suitable for
coating/lithography without prior cleaning by customer
- Oiled - Uncontrolled oil level not suitable for coating/lithography without prior cleaning by customer
- Cleaned and Oiled - Light chemical treatment plus ATBC or BSO oil.
- Full Finish - Heavier chemical treatment for rust protection plus ATBC or BSO oil.
|
Limitations
Widths
Coils and Cut Sizes
Base Weight |
Nominal Thickness-Inches |
Minimum Width-Inches |
Maximum Width-Inches |
| 55 To 60 Incl. |
.0061 To .0066 Incl. |
28 |
35 |
| 61 To 110 Incl. |
.0067 To .0110 Incl. |
26 |
36 |
Lengths
Cut Sizes
| Base Weight |
Nominal Thickness- Inches |
Minimum Length- Inches |
Maximum Length- Inches |
| 55 To 100 Incl. |
.0061 to .0110 Incl...... |
18 |
43 |
Note: Widths and lengths other than above-Inquire.
|
