BETHLEHEM OFFERS A RANGE OF STEEL GRADES, COATING WEIGHTS AND SIZES TO MEET YOUR SPECIFIC REQUIREMENTS. (continued)

THICKNESS

Tin Mill Products are available in various thicknesses and are produced to ASTM A623 tolerances unless otherwise agreed upon between the manufacturer and the purchaser.

Ordered Thickness Designation Nominal Thickness 50# .0055” 55# .0061” 60# .0066” 65# .0072” 70# 0077” 75# .0083”

Ordered Thickness Designation Nominal Thickness 80# .0088” 85# .0094” 90# .0099” 95# .0105” 100# .0110” 103# .0113”

Ordered Thickness Designation Nominal Thickness 107# .0118” 112# .0123” 118# .0130” 128# .0141” 135# .0149”

WIDTH/THICKNESS AVAILABILITY

SINGLE REDUCE ELECTROLYTIC TINPLATE
COILS AND CUT SIZE�MAXIMUM ORDERED WIDTH�INCHES*

Thickness Designation	T1	T2	T3	T4CA	T5CA
70 through 74	N/A	N/A	34	N/A	34
75 through 79	N/A	34	35	35	36
80 through 89	34	34	36	36	36
90 through 94	34	35	36	37	37
95 through 135	35	35	36	37	37

SINGLE REDUCED ELECTROLYTIC CHROMIUM COATED STEEL
COILS AND CUT SIZES�MAXIMUM ORDERED WIDTHS�INCHES*

Thickness Designation	T1	T2	T3	T4CA	T5CA
70 through 74	N/A	N/A	34	N/A	34
75 through 79	N/A	34	35	35	36
80 through 128	35	35	36	37	37

SINGLE REDUCED BLACK PLATE FULL-FINISH/CLEANED AND OILED
COILS AND CUT SIZES�MAXIMUM ORDERED WIDTHS�INCHES*

Thickness Designation	T1	T2	T3	T4CA	T5CA
70 through 74	N/A	N/A	34	N/A	34
75 through 79	N/A	34	35	36	36
80 through 128	35	35	36	37	37

SINGLE REDUCED BLACK PLAT-DRY
COILS AND CUT SIZES�MAXIMUM ORDERED WIDTHS�INCHES *

Thickness Designation	T1	T2	T3	T4CA	T5CA
70 through 74	N/A	N/A	34	N/A	34
75 through 79	N/A	34	35	36	37
80 through 128	36	36	36	37	37

* Notes: Minimum ordered widths for all items is 26 inches. Cut length sizes for all items are 18 inches minimum; 43 inches maximum.