Steelton
Flat Bars
The 20" Bar Mill at Bethlehem's Steelton, PA.
plant produces a wide range of square edge flats, special
sections, and double bevel flats from electric furnace,
continuous cast blooms. Typical grades are Carbon AISI
10xx, 11xx, and 15xx series, ABS, ASTM Structural, HSLA
grades, Alloy 40xx, 41xx, 51xx, and 86xx series,
Microalloy, Boron Treated, and H-steels.
Current Size Ranges - English
| SQUARE
EDGE FLATS |
THICKNESS
(in.) |
WIDTH
(in.) |
| 4" |
5" |
6" |
8" |
10" |
14" |
16" |
18" |
| .50 thru .75 |
|
|
X |
X |
X |
|
Inquire * |
| .76 thru 1.00 |
|
X |
X |
X |
X |
X |
| 1.01 thru 2.00 |
X |
X |
X |
X |
X |
X |
X |
X |
| 2.01 thru 3.50 |
X |
X |
X |
X |
X |
X |
X |
X |
| 3.51 thru 4.50 |
X |
X |
X |
X |
X |
X |
Inquire ** |
| 4.51 thru 5.50 |
X |
X |
X |
X |
X |
X |
*Grade dependent
**Application dependent
Section tolerances: AISI or By
inquiry
Length - 12'0" to 40'0". Longer by
inquiry.
Sheared, precision torch cut, hot or cold-sawed
ends
Straightness:
Standard - 1/4" per 5'
Special - 1/8" per 5'
Other additional requirements:
By inquiry
Base Order Quantity - 20 NT per item (less than 20
NT upon application)
Rolling Frequency - Approximately every 4 weeks
Current Size Ranges - Metric
| SQUARE
EDGE FLATS |
THICKNESS
(mm) |
WIDTH
(mm) |
| 95 thru 199 |
200 thru 249 |
250 thru 349 |
350 thru 399 |
400 thru 460 |
| 12 thru 19 |
X |
X |
|
Inquire |
| 20 thru 24 |
X |
X |
X |
| 25 thru 49 |
X |
X |
X |
X |
X |
| 50 thru 89 |
X |
X |
X |
X |
X |
| 90 thru 114 |
X |
X |
X |
Inquire |
| 115 thru 140 |
X |
X |
X |
Sizes beyond the above ranges:
By inquiry
Section tolerances: AISI or by
inquiry
Length - 4 m to 12 m. Longer by inquiry.
Sheared, precision torch cut, hot or cold-sawed
ends
Straightness:
Standard - 4 mm/m
Special - 2 mm/m
Other additional requirements:
By inquiry
Base order quantity - 20 MT per item (less than 20
MT upon application)
Rolling frequency - Approximately every 4 weeks
To inquire, please call us at (800) 344-7245,
or (717) 986-2000. Fax (717) 986-2700
|
